English
Whether you own a brand new faucet or have a vintage faucet with a decades-old cartridge, you'll likely find yourself having to replace the faucet cartridge at some point. And while replacing the faucet cartridge isn't something you can't avoid, there are several things you can do to help minimize the risk of damage to your faucet.
Compared to rubber washers, ceramic discs for faucet cartridges last longer. They can last up to a few years before needing to be replaced. They also aren't susceptible to wear and tear like rubber washers are.
Ceramic discs are also resistant to corrosion. The materials used in the manufacturing process, including aluminum oxide and aluminum oxide, provide good hardness and strength. The resulting discs are also slick and lubricated.
However, if you force the handle of a ceramic disc faucet too hard, you may end up breaking the discs inside the cartridge. This can cause a large gush of water to come out of the faucet.
Ceramic discs for faucet cartridges include quartz, feldspar and aluminum oxide (alumina). Each material has its own properties. Usually, the disc is coated with a water-insoluble lubricant that is strong and durable.
Unlike the original ball valve, which was brass, today's faucets use plastic cartridges. These are a more durable material and will last for decades.
A faucet cartridge is a plastic cylinder with notches on the side. This cylinder is connected to the handle of the faucet. Some faucets use a retaining clip to hold the cartridge in place. The retaining clip is a narrow piece of brass that is shaped like a horseshoe.
The retaining clip can be removed using a pipe wrench or adjustable pliers. The cartridge can then be lifted straight up. If the cartridge is stuck in place, a special tool may be necessary to remove it.
The cartridge is made of three main parts: the housing, the ceramic discs and the stem. The cartridge is usually white or blue. A cartridge can be sourced from several manufacturers.
Changing a faucet is a task that requires the right tools and parts. The shower valve thermostatic cartridge is one part that is important to the overall functionality of the faucet. The cartridge is responsible for mixing hot and cold water to prevent scalding of the skin. If the water temperature is not regulated properly, you may have a problem.
Thermostatic faucets are designed to maintain a consistent temperature throughout a shower. This saves energy. The temperature is regulated by a notched plastic disk attached to the valve stem. This disk can be removed with a pair of needle nose pliers.
Changing a shower faucet cartridge is easy. The cartridge is located behind the handle. To remove it, you will need a pair of pliers and a small screwdriver.
Adding a pressure balancing on faucet cartridge is a quick and easy way to improve your shower's longevity. Pressure balancing valves are designed to provide water at nearly constant temperature, making them a great choice for hard water areas. Generally, pressure balancing shower valves will fit into the same openings as a traditional single-handle faucet. Some of these valves even come with a built-in water conditioner to soften the water passing through the unit.
Pressure balancing on faucet cartridges can be found in a variety of sizes and shapes, from small cartridges that can be easily removed with a screwdriver to larger units with a more complex design. Whether you need a replacement cartridge or are repairing your shower, Quality Plumbing Supply can help. They stock dozens of pressure balancing on faucet cartridges for many different manufacturers.
