English
Replacing the cartridge in a kitchen faucet can vary depending on the make and model of your faucet. Here are some general steps to follow:
1.Turn off the water supply to the faucet. This is usually located underneath the sink.
2.Remove the handle from the faucet. This can usually be done by removing a screw or by prying off a cap and then removing a screw.
3.Remove the retaining clip or nut that holds the cartridge in place. This will depend on the faucet, so consult the manufacturer's instructions if you're not sure.
4.Pull the cartridge straight out of the faucet. If it's difficult to remove, you may need to use pliers to grip it and gently wiggle it back and forth while pulling it out.
5.Take the old cartridge to a hardware store to find a replacement that matches the make and model of your faucet.
6.Insert the new cartridge into the faucet, making sure it's properly seated.
7.Replace the retaining clip or nut to hold the cartridge in place.
8.Replace the handle and screw it back into place.
9.Turn the water supply back on and test the faucet to make sure it's working properly.
Note: If you're unsure about any step or don't feel confident doing it yourself, it's always a good idea to consult a plumber or a professional handyman.
Deck mounted cold only single cold kitchen sink faucet
Deck mounted cold only single cold kitchen sink faucet
1.Pb-freestructure
2.Rotatable Spout
3.Good quality cartridge
4.High quality corrosion-resistant Finish
